Honda CBR650RA Shop Manual page 72

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
PILLION SEAT
REMOVAL/INSTALLATION
Unhook the seat with the ignition key [1].
Remove the pillion seat [2] by pulling it rearward.
Install the pillion seat by inserting the prongs [3] under
the frame.
Push down the rear of the seat securely to lock it.
SIDE COVER
REMOVAL/INSTALLATION
Remove the main seat (page 2-11).
Remove the socket bolts [1].
Release the boss [2] from the grommet [3] of the fuel
tank.
Remove the side cover [4] by releasing the tab [5] from
the slot [6] of the rear cowl.
Remove the collar [7] and mounting rubber [8].
Installation is in the reverse order of removal.
REAR COWL
REMOVAL/INSTALLATION
Remove the following:
– Side cover (page 2-12)
– Clip [1]
– Two socket bolts [2]
Remove the rear cowl [3] while releasing its hook [4]
from the slot [5] of the rear fender B.
Installation is in the reverse order of removal.
2-12
[3]
[3]
[6]
[7]
[2]
[4]
[3]
[4]
[5]
[2]
[1]
[5]
[8]
[1]
[2]
[1]