Honda CBR650RA Shop Manual page 62

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
FRAME/BODY PANELS/EXHAUST SYSTEM
GENERAL
• This section covers removal and installation of the body panels and exhaust system.
• When disassembling, mark and store the mounting fasteners to ensure that they are reinstalled in their original locations.
• When installing the covers, make sure the mating areas are aligned properly before tightening the fasteners.
• Always replace the gaskets with new ones after removing the exhaust system.
• When installing the exhaust system, loosely install all of the fasteners. Always tighten the exhaust pipe joint nuts first, then
tighten the mounting bolt.
• Always inspect the exhaust system for leaks after installation.
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
2-2