Honda CBR650RA Shop Manual page 290

dummyhead dummyhead
CLUTCH/GEARSHIFT LINKAGE/STARTER CLUTCH
Install the clutch center [1] and thrust washer [2].
Install the lock washer [3] with its "OUT" mark [4] facing
out.
Apply engine oil to the threads and seating surface of a
new clutch center lock nut [1], then install it onto the
mainshaft.
Hold the clutch center [2] with the special tool and
tighten the lock nut to the specified torque.
TOOL:
[3] Clutch center holder 07724-0050002 or
TORQUE: 128 N·m (13.1 kgf·m, 94 lbf·ft)
Stake the lock nut [1] into the mainshaft groove with a
Be careful not to
punch.
damage the
mainshaft threads.
11-12
equivalent commercially
available
[1]
[1]
[3]
[1]
[4]
[3]
[2]
[2]
Stake