Honda CBR650RA Shop Manual page 475

dummyhead dummyhead
USB CHARGER UNIT (Except KO, IIKO,
U, IIU, BR, IIBR)
INSPECTION
Remove the main seat (page 2-11).
Turn the ignition switch OFF.
Disconnect the USB charger unit 2P (Black) connector
[1].
Turn the ignition switch ON.
Measure the voltage between the connector terminals.
CONNECTION: Light green/black (+) – Green (–)
There should be battery voltage when the ignition
switch is turned ON.
• If there is no voltage, check for blown fuse (OP fuse
7.5 A) or an open circuit in the wire harness.
• If the fuse and the circuit are normal but the USB
charger unit does not function, replace the a USB
charger unit.
REMOVAL/INSTALLATION
Remove the main seat (page 2-11).
Turn the ignition switch OFF.
Disconnect the USB charger unit 2P (Black) connector
[1] and remove the USB charger unit [2].
Installation is in the reverse order of removal.
LIGHTS/METERS/SWITCHES
[1]
[1]
G Lg/Bl
[1]
[2]
21-25