Honda CBR650RA Shop Manual page 151

dummyhead dummyhead
DTC
Bank angle sensor circuit low voltage (less than 0.020
V)
P1000
• Loose or poor contact of the bank angle sensor
(54-1)
connector
• Bank angle sensor or its circuit malfunction
Bank angle sensor circuit high voltage (more than 4.986
P1001
V)
(54-2)
• Bank angle sensor or its circuit malfunction
Rear wheel speed sensor malfunction
• Loose or poor contact of the rear wheel speed
P2158
sensor connector
(66-1)
• Faulty rear wheel speed sensor or its circuit
malfunction
Front wheel speed sensor malfunction
• Loose or poor contact of the front wheel speed
P1500
sensor connector
(67-1)
• Faulty front wheel speed sensor or its circuit
malfunction
Serial communication malfunction
P0600 • Loose or poor contact of the related connector
(86-1) • Faulty combination meter or its circuit malfunction
• Faulty ECM
EVAP purge control solenoid valve malfunction
• Loose or poor contact of the EVAP purge control
P0443
solenoid valve connector
(88-1)
• EVAP purge control solenoid valve or its circuit
malfunction
PAIR control solenoid valve malfunction
P0412 • Loose or poor contact of the PAIR control solenoid
(89-1) valve connector
• PAIR control solenoid valve or its circuit malfunction
Ignition coil 1 primary circuit malfunction
• Loose or poor contact of the ignition coil connector
P0351
• Ignition coil or its circuit malfunction
(91-1)
Ignition coil 2 primary circuit malfunction
• Loose or poor contact of the ignition coil connector
P0352
• Ignition coil or its circuit malfunction
(92-1)
Function Failure Symptom/Fail-safe function
• Engine operates normally
• Engine stop function does not operate
• Engine operates normally
• Engine stop function does not operate
• Engine operates normally
• HSTC does not operate
• Quickshifter does not operate
• Engine operates normally
• HSTC does not operate
• Engine operates normally
• Engine operates normally
• Engine operates normally
• Engine stalls, hard to start, rough idling
• No.1, No.4 Injector, and ignition 1 shut
down
• HSTC does not operate
• Quickshifter does not operate
• Engine stalls, hard to start, rough idling
• No.2, No.3 Injector, and ignition 2 shut
down
• HSTC does not operate
• Quickshifter does not operate
PGM-FI SYSTEM
Refer
to
4-64
4-65
4-66
4-67
4-69
4-71
4-72
4-74
4-74
4-47