Honda CBR650RA Shop Manual page 254

dummyhead dummyhead
LUBRICATION SYSTEM
OIL PRESSURE INSPECTION
• If the engine oil pressure indicator remains on while
the engine is running, check the indicator system
before checking the oil pressure (page 21-12).
Remove the EOP switch (page 21-13).
Install the oil pressure gauge attachment [1] to the
switch base.
Connect the oil pressure gauge [2] to the oil pressure
gauge attachment.
TOOLS:
Oil pressure gauge set
Oil pressure gauge attachment
Check the oil level and add the recommended oil if
necessary (page 3-10).
Warm the engine to normal operating temperature
(approximately 80°C/176°F).
STANDARD:
490 kPa (5.0 kgf/cm
at 5000 min
Stop the engine and remove the tools.
Install the EOP switch (page 21-13).
OIL PUMP
REMOVAL/INSTALLATION
Remove the clutch (page 11-6).
Remove the bolts [1] and oil pump [2].
9-4
07506-3000001 or
equivalent
commercially
available
07406-0030000 or
equivalent
commercially
available
2
, 71 psi)
-1
(rpm)/80°C (176°F)
[2]
[1]
[1]
[2]