Honda CBR650RA Shop Manual page 65

dummyhead dummyhead
REARVIEW MIRROR
REMOVAL/INSTALLATION
CBR650RA
Remove the socket bolts [1] and rearview mirror [2].
Installation is in the reverse order of removal.
• Install with the reference mark [3] facing the rear
side.
TORQUE:
Rearview mirror mounting socket bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
CB650RA
Slide the boot [1] off from the lock nut [2].
Loosen the lock nut (left-hand threads) and remove the
rearview mirror [3].
Remove the mirror adaptor [4].
Installation is in the reverse order of removal.
TORQUE:
Rearview mirror lock nut:
20 N·m (2.0 kgf·m, 15 lbf·ft)
Rearview mirror adaptor:
20 N·m (2.0 kgf·m, 15 lbf·ft)
FRONT FENDER
REMOVAL/INSTALLATION
Remove the following:
– Front wheel (page 16-15)
– Cap nut [1] and brake hose clamp [2]
– Bolt [3] and brake hose clamp [4]
– Four socket bolts [5]
– Two reflex reflectors [6]
(Except TH, IITH, IN, BR, IIBR models)
– Front fender [7]
– Four collars (TH, IITH, IN, BR, IIBR models) [8]
– Two collars (Except TH, IITH, IN, BR, IIBR models)
[8]
– Four grommets [9]
– Two rubber [10]
Installation is in the reverse order of removal.
TORQUE:
Front reflector mounting nut
(Except TH, IITH, IN, BR, IIBR models):
1.8 N·m (0.2 kgf·m, 1.3 lbf·ft)
FRAME/BODY PANELS/EXHAUST SYSTEM
[1]
[3]
[1]
[2]
[4]
CB650RA shown:
[6] (Except TH, IITH, IN, BR, IIBR models)
[2]
[1]
[10]
[8]
[7]
[9]
[5]
[3]
[2]
(TH, IITH, IN, BR, IIBR
models)
[4]
[6]
[3]
(Except TH, IITH, IN,
BR, IIBR models)
2-5