Honda CBR650RA Shop Manual page 226

dummyhead dummyhead
FUEL SYSTEM
Install a new O-ring [1] to the fuel pump stay [2].
Install the fuel pump unit assembly [3] by aligning the
grooves with the fuel pump stay tabs.
Install the stoppers [1], Black wire terminals [2] and
screws [3].
Tighten the screws securely.
Connect the Pink wire connector [4] and Blue wire
connector [5].
AIR CLEANER HOUSING
REMOVAL/INSTALLATION
Remove the following:
– Fuel tank (page 7-7)
– Air cleaner lid (page 3-5)
– Intake air duct (page 2-8) (CBR650RA)
– Shroud (page 2-10) (CB650RA)
Release the following:
– Optional 2P (Black) connector [1] from the air
cleaner housing [2]
– EOP switch 1P (Black) connector [3] from the air
cleaner housing
– Wire clip [1]
Disconnect the MAP sensor 3P (Black) connector [2]
and vacuum hose [3] from the air cleaner housing.
7-12
[3]
Align
[2]
[3]
[1]
[1]
[2]
[3]
[5]
[4]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]