dummyhead
dummyhead
PGM-FI SYSTEM
GST (General Scan Tool) INFORMATION
• The GST can readout the DTC, freeze data, current data and other ECM condition.
How to connect the GST
Remove the main seat (page 2-11).
Turn the ignition switch OFF.
Remove the dummy connector [1] from the DLC.
Connect the GST to the DLC.
Turn the ignition switch ON.
Check the DTC and freeze data.
OBD harness circuit connection
(General allocation in ISO 15031-3)
Signal ground
CAN_H
Discretionary (SCS line)
K-line
CAN_L
Permanent positive battery
MCS INFORMATION
• The MCS can readout the DTC, freeze data, current data and other ECM condition.
How to connect the MCS
Remove the main seat (page 2-11).
Turn the ignition switch OFF.
Remove the dummy connector [1] from the DLC.
Connect the MCS to the DLC.
Turn the ignition switch ON, check the DTC and freeze data.
Freeze data indicates the engine conditions when the first malfunction was
detected.
4-8
DLC 6P
16P
A
5
B
6
C
9
D
7
E
14
F
16
[1]
[1]