Honda CBR650RA Shop Manual page 297

dummyhead dummyhead
GEARSHIFT LINKAGE
REMOVAL
Remove the clutch (page 11-6).
Remove the pinch bolt [1] and disconnect the gearshift
arm [2] from the gearshift spindle.
Remove the bolt [1] and setting plate [2].
Pull the gearshift spindle assembly [1] and thrust
washer [2] out of the crankcase.
Remove the following:
– Stopper arm pivot bolt [1]
– Washer [2]
– Stopper arm [3]
– Return spring [4]
– Shift drum center socket bolt [5]
– Gearshift cam [6]
– Dowel pin [7]
CLUTCH/GEARSHIFT LINKAGE/STARTER CLUTCH
[1]
[2]
[1]
[3]
[4]
[1]/[2]
[2] [1]
[6]
[5]
[2]
[7]
11-19