Honda CBR650RA Shop Manual page 381

dummyhead dummyhead
Loosen the steering bearing adjustment nut [1] using
the special tool.
TOOL:
[2] Steering stem socket
While holding the steering stem, remove the adjustment
nut.
Remove the following:
– Steering stem [1]
– Upper dust seal [2]
– Upper inner race [3]
– Upper steering bearing [4]
– Lower steering bearing [5]
BEARING REPLACEMENT
Remove the upper outer race using the special tools.
Always replace the
bearing and races
TOOLS:
as a set.
Ball race remover set
– [1] Remover attachment
– [2] Remover shaft
Remove the lower outer race using the special tool and
a suitable shaft.
TOOL:
[1] Bearing remover
FRONT WHEEL/SUSPENSION/STEERING
07916-3710101
[1]
[4]
07953-MJ10000
07953-MJ10100
07953-MJ10200
07946-3710500
[1]
[2]
[1]
[2]
[3]
[2]
[1]
16-39
[5]