Honda CBR650RA Shop Manual page 342

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Install the removed parts in the reverse order of
removal.
• Install the drive sprocket [1] with its marked [2] side
facing out.
• Align the clutch cable holder hole with the right
crankcase cover boss.
TORQUE:
Drive sprocket bolt:
54 N·m (5.5 kgf·m, 40 lbf·ft)
EOP switch terminal screw:
2.0 N·m (0.2 kgf·m, 1.5 lbf·ft)
Right crankcase cover bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Adjust the following:
– Throttle grip freeplay (page 3-4)
– Clutch lever freeplay (page 3-23)
– Drive chain slack (page 3-15)
Fill the engine with the recommended engine oil (page
3-10).
Fill and bleed the cooling system (page 8-4).
Check the exhaust system and cooling system for
leaks.
15-8
[2]
[1]
Align