dummyhead
dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Install the stem nut [1] onto the steering stem [2] to
prevent the threads from being damaged when
removing the lower inner race [3].
Remove the lower inner race with a chisel or equivalent
tool, being careful not to damage the stem.
Remove the lower dust seal [4].
Install a new lower dust seal [1] onto the steering stem.
Press a new lower inner race [2] using the special tool.
TOOL:
[3] Steering stem driver
Drive in a new upper outer race [1] into the steering
head pipe using the special tool.
TOOLS:
[2] Driver
[3] Attachment, 42 x 47 mm
Drive in a new lower outer race.
TOOLS:
Driver
Attachment, 52 x 55 mm
16-40
07946-MB00000
07749-0010000
07746-0010300
07749-0010000
07746-0010400
[4]
[3]
[3]
[1]
[2]
[1]
[2]
[2]
[3]
[1]