Appendix 2.3.3 Parameter Errors (S51) - Mitsubishi Electric M700VS Series Setup Manual

MITSUBISHI CNC
Appendix 2 Explanation of Alarms

Appendix 2.3.3 Parameter Errors (S51)

S51 Parameter error 2201-2264 (Axis name)
Details
Servo parameter setting data is illegal.
The alarm No. is the No. of the servo parameter where the warning occurred.
Remedy
Check the descriptions for the appropriate servo parameters and correct them.
S51 Parameter error 13001-13256 (Axis name)
Details
Spindle parameter setting data is illegal.
The alarm No. is the No. of the spindle parameter where the warning occurred.
Remedy
Check the descriptions for the appropriate spindle parameters and correct them.
Refer to Spindle Drive Maintenance Manual.
538