Mitsubishi Electric M700VS Series Setup Manual page 53

MITSUBISHI CNC
3 Setting Up with M70/M700 SETUP INSTALLER
(Note) M70/M700 SETUP INSTALLER is used to install language data other than Japanese and English, as well as
custom screens.
If you do not need the installation, go to the next section.
You can install the following data with M70/M700 SETUP INSTALLER.
(1) Language data
(2) Custom data
- Custom screen
- PLC alarm guidance
(3) Custom startup screen
A CF card is used for the installation.
The following products' operations have been guaranteed by MITSUBISHI.
<SanDisk CompactFlash cards>
64MB SDCFB-64-J60 (JAN: 4523052000294)
128MB SDCFB-128-J60 (JAN: 4523052000300)
256MB SDCFB-256-J60 (JAN: 4523052000317)
512MB SDCFB-512-J60 (JAN: 4523052000324)
1.0GB SDCFB-1024-J60 (JAN: 4523052000331)
<Panasonic SD memory cards>
1.0GB SD-CF adapter BN-CSDABP3/P + SD memory card (1GB) RP-SDM01GJ1A
2.0GB SD-CF adapter BN-CSDABP3/P + SD memory card (2GB) RP-SDM02GJ1A
(Note) The adapter BN-CSDABP3/P does not support SDHC memory card.
SD-CF adapter which supports SDHC is required when SDHC memory card is used.
The successful operations of these cards are confirmed under certain conditions. Some cards might not work under
the end-users' system environment. And some cards might have the same type name but different parts inside:
Complete guarantees cannot be given.
Contact the manufacturer or distributor before purchase: There might be some cards which are not currently
produced.
36