Mitsubishi Electric M700VS Series Setup Manual page 445

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#7293】 G[10] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7302】 Smac Type
Set the type for when calling the macro with an S command.
This is valid when "#1196 Smac" is set to "1".
0: M98 P △△△△ ; and equivalent value call
1: G65 P △△△△ ; and equivalent value call
2: G66 P △△△△ ; and equivalent value call
3: G66.1 P △△△△ ; and equivalent value call
others: M98 P △△△△ ; and equivalent value call
【#7303】 Smac Program No.
Set the program No. for when calling the macro with an S command.
This is valid when "#1196 Smac" is set to "1".
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7312】 Tmac Type
Set the type for when calling the macro with a T command.
This is valid when "#1197 Tmac" is set to "1".
0: M98 P △△△△ ; and equivalent value call
1: G65 P △△△△ ; and equivalent value call
2: G66 P △△△△ ; and equivalent value call
3: G66.1 P △△△△ ; and equivalent value call
others: M98 P △△△△ ; and equivalent value call
【#7313】 Tmac Program No.
Set the program No. for when calling the macro with a T command.
This is valid when "#1197 Tmac" is set to "1".
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7401】 ASCII[01] Valid
The ASCII code macro parameters (#7402 to 7405) are validated.
0: Invalid
1: Valid
【#7402】 ASCII[01] Code
Set the ASCII code used to call macros with the ASCII code.
L system: A,B,D,F,H,I,J,K,M,Q,R,S,T
M system: A,B,F,H,I,K,M,Q,R,S,T
【#7403】 ASCII[01] Type
Set the macro call type.
0: M98
1: G65
2: G66
3: G66.1
428