Mitsubishi Electric M700VS Series Setup Manual page 257

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#1207】 G1btL Time constant
Set a cutting feed time constant when applying pre-interpolation acceleration/deceleration.
When set to "0", the time constant will be clamped at 1ms.
Speed
G1bF
---Setting range---
Without high-accuracy control time constant expansion: 0 to 5000 (ms)
With high-accuracy control time constant expansion: 0 to 30000 (ms)
Cutting feed Acc
Displays cutting feed acceleration.
【#1208】 RCK Arc radius error compensation factor
Set a coefficient for arc radius error compensation.
An arc radius error compensation amount can be increased or decreased between -60.0 and
+20.0%.
---Setting range---
-60.0 to +20.0 (%)
【#1209】 cirdcc Arc deceleration speed
Set the deceleration speed at the arc entrance or exit.
---Setting range---
1 to 999999 (mm/min)
240
Time
G1btL
Cutting feed acceleration