Installing Custom Data - Mitsubishi Electric M700VS Series Setup Manual

3.2.3 Installing Custom Data

(1) Select [Custom Data] on the Mode Select screen to switch to the Custom Data Install screen.
(2) Select [Install].
(3) A confirmation message appears. Select [Yes] to start the installation.
(4) A message appears when the installation has been completed.
(Note 1) Selecting [No] displays the previous menus.
(Note 2) Do not turn the power OFF during the installation.
(5) To close M70/M700 SETUP INSTALLER, turn the power OFF and ON.
To return to the Mode Select screen, press the cancel key
M700VS Series Setup Manual
3.2 Operation Procedure
(<< Cancel).
41