Mitsubishi Electric M700VS Series Setup Manual page 137

MITSUBISHI CNC
11 Data Backup and Restoration
(7) The menu is highlighted. The operation message "Select directory to backup" appears. Select the backup
destination ("Manual" or "Master data") in the backup list. Then press the INPUT key.
(Note) "Backup list" shows the list of backup destination directories and backup dates/times (year, month, date
and hour). The date field is blank when the backup has never been executed.
Auto1 to 3: Files automatically backed up
Manual: Files manually backed up
Master data: Files manually backed up, basically for shipping
"Auto1 to 3" cannot be selected at all backup.
(8) The operation message "OK? (Y/N)" appears. Press Y or INPUT key to start the backup.
(Note) If any data exists in the backup directory (backup date is shown), the overwriting confirmation message
appears when Y or INPUT key has been pressed. Press Y or INPUT key to start the backup.
(9) The operation message "Performing Backup" appears.
(10) When the backup is completed without error, the operation message "Backup complete" appears.
Open the interface door on front of display unit and eject the CF card.
(Note) Press the eject lever twice to eject the CF card.
(11) Cancel the emergency stop.
120