Mitsubishi Electric M700VS Series Setup Manual page 225

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#9721】 Host 1 no total siz
Set whether to display the total number of characters registered in the machining programs of host1
when displaying the file list.
If there are many files in the directory to be referred to, the list can be updated quickly by setting "1".
0: Display
1: Not display
【#9731】 Host2 host name
Set the host computer name.
This parameter allows the NC to easily recognize the host computer on the network. Set the host
computer's name (name registered in C:\windows\hosts) or the IP address.
<Setting example>
For host name: mspc160
For IP address: 150.40.0.111
(Note) Set the host computer's TCP/IP address if communication is not carried out correctly.
---Setting range---
15 characters (alphanumeric) or less
【#9732】 Host2 user name
Set the user name when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
【#9733】 Host2 password
Set the password when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
【#9734】 Host2 directory
Set the directory name of the host computer.
The directory released to the client (NC unit) with the host computer's server is handled as the root
directory by the NC unit.
---Setting range---
31 characters (alphanumeric) or less
【#9735】 Host2 host type
Select the type of the host computer.
0: UNIX/PC automatic judgment
1: UNIX
2: PC (DOS)
(Note) When "0" is set, the settings for the following parameters will be invalid.
- #9736 Wrd pos: name
- #9737 Wrd pos: size
- #9738 Wrd pos: Dir
- #9739 Wrd pos: cmnt
- #9740 Wrd num: cmnt
【#9736】 Host 2 Wrd pos: name
Set the file name display position (nth word from left) of the list displayed when the ftp command "dir"
is executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
208