Mitsubishi Electric M700VS Series Setup Manual page 440

【#7073】 M[08] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7081】 M[09] Code
Set the M code used for calling out the macro with the M command.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
1 to 9999
【#7082】 M[09] Type
Set the macro call out type.
0: M98 P △△△△ ; and equivalent value call
1: G65 P △△△△ ; and equivalent value call
2: G66 P △△△△ ; and equivalent value call
3: G66.1 P △△△△ ; and equivalent value call
others: M98 P △△△△ ; and equivalent value call
【#7083】 M[09] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7091】 M[10] Code
Set the M code used for calling out the macro with the M command.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
1 to 9999
【#7092】 M[10] Type
Set the macro call out type.
0: M98 P △△△△ ; and equivalent value call
1: G65 P △△△△ ; and equivalent value call
2: G66 P △△△△ ; and equivalent value call
3: G66.1 P △△△△ ; and equivalent value call
others: M98 P △△△△ ; and equivalent value call
【#7093】 M[10] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
M700VS Series Setup Manual
Appendix 1.9 Macro List
423