Mitsubishi Electric M700VS Series Setup Manual page 200

【#8941(PR)】 ABS/INC for T-ofs
Enable switching the method to set tool compensation data
(absolute/incremental value) with INPUT key.
0: Fix it to the absolute value input.
1: Enable to switch between absolute and incremental value input.
【#8942(PR)】 $1 color
Set the color to be shown on the top-left of screen for the 1st part system. This enables switching the
color patterns for each part system.
When set to the values 1 to 4, the part system name is shown in the form of button image.
When set to 0, the settings between #8943 and #8945 is disabled and the screen is shown by the
default color pattern for all the part systems.
0: Purple (no button image) (default)
1: Purple
2: Pink
3: Light blue
4: Orange
【#8943(PR)】 $2 color
Set the color to be shown on the top-left of screen for the 2nd part system. This enables switching
the color patterns for each part system. When set to the values 1 to 4, the part system name is
shown in the form of button image.
Note) Enabled when #8942 ($1 color) is set to the values 1 to 4.
1: Purple (default)
2: Pink
3: Light blue
4: Orange
【#8944(PR)】 $3 color
Set the color to be shown on the top-left of screen for the 3rd part system. This enables switching the
color patterns for each part system. When set to the values 1 to 4, the part system name is shown in
the form of button image.
Note) Enabled when #8942 ($1 color) is set to the values 1 to 4.
1: Purple (default)
2: Pink
3: Light blue
4: Orange
【#8945(PR)】 $4 color
Set the color to be shown on the top-left of screen for the 4th part system. This enables switching the
color patterns for each part system. When set to the values 1 to 4, the part system name is shown in
the form of button image.
Note) Enabled when #8942 ($1 color) is set to the values 1 to 4.
1: Purple (default)
2: Pink
3: Light blue
4: Orange
【#8951】 No Tab counter sw.
Disable Tab key to change the counter type.
0: Enable Tab key to change counter typ
1: Disable Tab key to change counter type
【#8952】 Edit-win $ switch
Select whether to enable switching of program displayed in the edit window on Monitor screen
according to the displayed part system when part system switch is performed.
0: Not switch
1: Switch
(The value of #8905 also changes)
M700VS Series Setup Manual
Appendix 1.1 User Parameters
183