Setting The Communication With Gx Developer - Mitsubishi Electric M700VS Series Setup Manual

MITSUBISHI CNC
5 PLC Program Writing

5.3 Setting the Communication with GX Developer

(1) Start GX Developer on the personal computer. Open a created project.
(2) Select [Transfer setup...] from the [Online] menu.
(3) On the "Transfer Setup" screen, click "Ethernet board" in the "PC side I/F" field and double-click "Ethernet module"
in the "PLC side I/F" field.
(4) Select "QJ71E71" for "PLC", input "192.168.200.1" for IP address, then click "OK".
60