Error Checking - Siemens SINUMERIK 840D sl Operating Manual
Integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
This permits the exchange of data between NCU/PPU and PC/PCU during the package
execution.
7.2.3
Error checking
What must be checked in the event of an error?
Use of virtual machines
In connection with virtual machines, problems may occur when establishing a connection,
because the share of the NCU cannot be achieved.
To ensure the NcuShareService functions correctly, only operate the virtual machine in
"Bridged Mode". In "Bridged Mode", the share can be achieved by another computer while the
service is running.
Created user
During installation, the user "UpNcuUser" is created and the password is automatically
assigned.
For security reasons, the password is changed each time the "UpNcuShareService" is started.
Note
If no user is available when the "UpNcuShareService" is started, a new user is automatically
created.
Configuration of the service
The service is terminated and automatically removes the share if no package is executed.
The service does not need to be configured.
Note
The default settings of the UpNcuShare service must not be changed.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - FAQs
7.2 Help for problems with NcuShareService
531
Advertisement
Table of Contents
