Siemens SINUMERIK 840D sl Operating Manual page 42

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
A $MA_CTRLOUT_NR entry in an inclusion list includes all identifiers that belong to this field,
i.e. $MA_CTRLOUT_NR[0] and $MA_CTRLOUT_NR[1].
①
②
③
④
⑤
⑥
①
Using the expert list
To use an expert list, it can be activated by selecting "Use expert list".
Note
If an expert list is active, then all of the identifiers that have been filtered-out are not compared
and are also no longer displayed. The
②
Import...
Identifiers can be imported from a file via this button.
③
Extract identifiers
If identifiers were imported via the clipboard or a file, then values or additional information that
are not identifiers can be included.
Identifiers can be extracted from the imported characters using this button.
The "Extract identifiers" function removes the identifiers that occur more than once in the list.
Comments, i.e. all characters that follow a semicolon, are not removed.
④
Combine indices
This button can be used to combine indexed machine data to form global machine data:
42
Using the expert list
Import... button
Extracting identifiers button
Combining indices button
Including/excluding data with identifiers
Field listing the identifiers
icon is displayed in the status bar.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE