Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.26
Notes on the topology (configuration)
This dialog sends notes on the "SINAMICS topology" to the operator.
You can configure the following property group for the "Notes on the topology" dialog page:
● Dialog
Figure 4-31
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Notes on the topology - project engineer view
Create MyConfig - Expert
4.4 Project folder
195