Siemens SINUMERIK 840D sl Operating Manual page 184
Integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Create MyConfig - Expert
4.4 Project folder
Display associated system variables button
Clicking the
system variables" dialog. All system variables to be used for "CNC software" are listed here.
Information on the system variables·can be found in the System variables for the CNC software
dialog (Page 377) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Installation
The following settings are available for the "Installation" property:
Mode
Setting disa‐
bled
CNC software (*.tgz)
The following settings are available for the "CNC software (*.tgz)" property:
List
Preselection
184
button (Display associated system variables) opens the "CNC software -
None
Here, you select the type of installation.
"New installation" means that the CF card is deleted and the system
New installa‐
tion
software is reinstalled.
The NC, PLC and DRV subsystems are overall reset and default data
Upgrade
is loaded.
In the "Upgrade" mode, the NC, PLC and DRV data is migrated im‐
mediately after installing the new CNC software, i.e. before the step
is executed.
Note
Data migration means that the backed-up archive is imported from
the previous firmware version to the newly installed firmware version.
The step execution will be performed later based on the archive data
of the newly installed firmware version.
Yes
The setting for the "mode" can be disabled for the operating proce‐
dure.
No
tgz files that contain the CNC software are provided by Siemens Support and can be
inserted as copy or link in a list.
Linked files are not taken into this list until the package is deployed.
A file can be preselected from the list.
If no file is preselected, the operator must make the selection on the machine.
With the specification of './<Path>/<File>', a file next to the package can be preselec‐
ted. For example, ./std31a10c_hmi.tgz is then in the preselection.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Advertisement
Table of Contents
