Editing Script Libraries - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.6 Script language
Toolbar
Table 4-33 Toolbar for the "List of user script libraries" dialog
Toolbar
New script library
Insert...
Insert as link...
Remove
Up/down
Refresh display
4.6.18.2

Editing script libraries

By double-clicking a list entry or via the "Open" context menu, you open a "*.uplib" script library
for editing. The display and editing is performed in the Script Editor (Page 339), which is also
used for dialog scripts and step scripts.
General syntax
The syntax check and the syntax highlighting generally correspond to that of the manipulation
task with "Target area" "ALL".
The machine and drive data therefore can only be read and written through the use of syntax
for manipulation tasks with "Target area" > "ALL".
Further information can be found in Section Data accesses (Page 333).
;Read access
If NC[C1].$MA_NUM_ENCS[AX1] == 1
NC[C1]
If $MA_NUM_ENCS[AX1] == 1
;Write access
PS[B3_S3_PS4]
p105 = 1
342
Insert new script library
Link new script library
Inserts a new "*.uplib" script library or links a new
script library.
Inserts a script library from an external path in
the "List of user script libraries".
Inserts a script library from an external path as
link in the "List of user script libraries".
Removes script libraries from the "List of user
script libraries".
The order of the entries in the lists can be freely
sorted.
Update of links, e.g. after a change in an external
editor.
Read in the linked sources again with the button.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE