Logbook - End - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-149 Example Step tree dialog - display of the step script
Subinstance ServiceDate Transfer
ServiceDate Transfer belongs to the dialog - Service Platform Industry (GSP). The listed
actions are always carried out at the end of the Step tree dialog page, after the archive data
transfer, directly in the control.
4.12.4.7

Logbook - end

The warnings and errors are always output in the last lines of the logbook.
Example:
Log saved on control as: 'Test
#If_201611291030.htm'
0 warning(s), 0 error(s), 0 fault(s)
End: Di 29. Nov 10:30:24 2016
Explanatory note about Warnings, Errors and Faults
● Warnings are normally warnings set by the project engineer that require from the user a
decision with regard to a package termination or continuation.
● Errors are errors detected by the package or error messages set by the project engineer
that force termination of the package because further useful execution is no longer possible.
● Faults are faults reported by the control system that cause termination of the package
execution.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.12 Package execution
421