Pcu Access (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Information on the system variables can be found in the System variables for the PCU access
dialog (Page 373) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Address
The "Preselection" is already set to the default address 192.168.214.241 of the "PCU50".
Note
If the package is to be executed locally on a PCU, the specified address has no significance.
Login information
The following settings are available for the "Login information" property:
User name
Password
Note
Package execution and access rights
● For the automatic package execution locally on the PCU, e.g. via a USB stick, the package
is automatically assigned the required rights by the system.
● For the manual start of the package on the PCU, the package is given the rights for the
user logged into the PCU (e.g. auduser).
Dialog scripts
In the "Dialog scripts", "Scripts" entry, click the
this dialog, you can edit scripts to be executed at selectable times during package execution.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 145)".
4.4.2.13

PCU access (package execution)

This dialog specifies with which PCU and which login data the package should be connected
for the execution.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Neither a user name nor a password is pre-assigned for a new project.
If the user name and password are not specified, a login is started with
the default user of the PCU50"auduser" and the appropriate password
for the package execution.
button to call the "Dialog scripts" dialog. In
Create MyConfig - Expert
4.4 Project folder
167