Configuration Of The Automatic File Identification - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Diff
3.5 File comparison
⑤
⑥
Two typical comparison configurations for SINUMERIK are subsequently shown and their
comparison results as example.
Comment tab
Any comments on the selected comparison configuration can be saved in the Comment tab.
3.5.4

Configuration of the automatic file identification

Automatic file identification in Diff
An automatic file identification for file comparison is integrated in Diff. This file identification
identifies the file type based on its file name or file content, and selects an appropriate
comparison configuration.
104
In addition, for lines for which the definitions
system handles lines that are not identical, but similar when it comes to aligning them. This
means it is defined as to whether similar lines, depending on the degree of similarity, are shown
offset to one another (green and blue arrow) or next to one another (red unequal icon).
This diagram should symbolically explain how the slider functions.
③ ④
and do not apply, this slider sets how the
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE