Schematic Overview - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.7 Configuring user interface languages for packages
User texts in scripts
You manually create user texts that you use in your scripts in user language resource files and
reference these texts in your scripts. How to proceed here is also described in the following
sections:
When your translation office has translated the language resource files of your standard
language, the language resource files can be used in the project for the other standard
languages.
In the following, the standard language in which you configure is called the 1st standard
language and the other standard languages the 2nd to 6th standard language.
Further information on the standard languages can be found at:
Procedure for 1st standard language (Page 353)
Procedure for 2nd to 6th standard language (Page 354)
4.7.2.1

Schematic overview

Schematic overview
The configuration of a project is shown schematically in the following. The use of the language
resource files is shown in different colors.
348
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE