Important Folders And Files - Siemens SINUMERIK 840D sl Operating Manual

Changing the share folder
The share folder is defined during the installation of the "UpNcuShareService".
In case of an installation with Create MyConfig or manual setups, the user can change the
path during the installation.
If the "UpNcuShareService" is installed during the package execution, the standard path is
always used.
To subsequently change the exchange folder, the "UpNcuShareService" must first be
uninstalled and then re-installed.
See also
http://support.microsoft.com/kb/307874 (http://support.microsoft.com/kb/307874)
7.3

Important folders and files

The following table contains a list of files and folders that can be helpful when using Create
MyConfig (CMC).
Directory/file
%tmp%\UPShield\
tmp/sci/
tmp/drv01/
data/
*.htm
SciSvcError.tar.gz
user/sinumerik/hmi/log/sltrc/
uptrace.out, user/sinumerik/hmi/log/
sltrc/uptrace.old
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - FAQs
7.3 Important folders and files
Description
Working directory for Shield on Windows system
Working directory for Shield on Linux systems
Directory of the USB stick on Linux systems.
When using an NCU boot stick, valid after the first
"Reboot from CF".
Directory of the USB stick on Linux systems when
using an NCU boot stick.
Valid until the first "Reboot from CF".
Logbook of the package run for diagnostic purpo‐
ses through the user or SINUMERIK hotline.
It is created during the package execution in the
working directory of Shield and is saved at the end
of the package, as configured.
Log file for error diagnostics through the SINU‐
MERIK hotline.
It is created next to the package.
Trace file for error diagnostics through the SINU‐
MERIK hotline.
533