Siemens SINUMERIK 840D sl Operating Manual page 247

Figure 4-57
The stored areas of a configuration are displayed in the "Content" column in the respective
"List of the project, package or step configurations" dialog.
Configuration - Load from list
Stored configurations can be selected and loaded via the "Configuration" main menu > "Load
from list".
Figure 4-58 "Configuration" main menu > "Load from list" > (<selection>)
To load a specific configuration, always select it via the "Configuration" main menu > "Load
from list" > <selection>.
In the "Select configuration" dialog, select which of the stored areas should be loaded. By
default, all stored areas are selected.
Figure 4-59
The data preparation from the configuration is logged in the "Verification run" window.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
"Save in list" - "Select configuration" dialog
Configuration selection query when loading the package
Create MyConfig - Expert
4.4 Project folder
247