Siemens SINUMERIK 840D sl Operating Manual page 457

Table 6-4 Topo - Data main menu
Data
Manage DO list...
Manage axis-drive assign‐
ment...
Manage NC data...
Table 6-5 Topo - Comparison main menu
Comparison
Refresh
Edit configuration...
Select configuration
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Ctrl+Alt+D Opens the "DO list" dialog for the administration of DO variables.
The DO variables can be added, imported, exported, or linked.
You can find additional information at Manage DO list
(Page 470).
Ctrl+Alt+A Opens the "Axis-drive assignment - Topology" dialog in which
the axis-drive assignment table is shown and an axis-drive as‐
signment can be performed.
A special feature is the display of the automatically generated
DO variables, which can also be assigned manually.
When moving drive objects (DO), the required calculations are
performed automatically.
You can also perform the desired Axis-drive assignment man‐
ually.
Further information can be found at Axis-drive assignment
(Page 485).
Ctrl+Alt+N Opens the "NC data - <Name of the Topo project>" dialog.
The view of the dialog is identical to the view at Diff. Machine
data or parameters are displayed for processing.
Light gray parameters with the identifier "calculated" are auto‐
matically processed by Topo and cannot be changed.
If the drive data is deleted, the DO is displayed empty.
It is not possible to add parameters.
Ctrl+D
Ctrl+M Opens the "Configuration - Topology comparison" dialog in
which you can manage comparison configurations (i.e. create,
edit, delete, etc.).
Topology Compares the currently displayed topologies and switches over
into the compare mode.
Complete
You can find additional information at Topology comparison
(Page 482).
To display several topologies, select these in the list of topolo‐
gies using the <Ctrl> key and a mouse click. A maximum of two
topologies can be compared simultaneously.
Create MyConfig - Topo
6.3 Overview of user interface
457