Ncu/Ppu Result State (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Dialog view during package execution (for commissioning engineers / operators)
Further information can be found on package execution in the Package execution (Page 405)
section.
Figure 4-44
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.37

NCU/PPU result state (configuration)

This dialog allows a data backup of the result state of the NCU/PPU after the package
execution.
All current control data, including the CF card, or only the currently active online data of the
NC, PLC and DRV subsystems can be saved as SINUMERIK archive.
You can configure the following property groups for the "NCU/PPU result state" dialog page:
● Dialog
● Data backup CF card
● Archive
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Archive data transfer (package execution)
Create MyConfig - Expert
4.4 Project folder
219