Siemens SINUMERIK 840D sl Operating Manual page 463

Function
Replace component
DO status
Component status
Assign component number
Generate DO / DO properties
Remove drive data
Remove axis data
Cut
Copy
Paste
Delete
Rename
Find
Zoom
Reset graphic
Select module in the catalog
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Description
Replaces the selected component with a preconfigured and
unused component for the assigned DO in the DO list.
The wiring of the component remains unchanged. The proper‐
ties that do not belong to the preconfigured component also
remain unchanged.
0 = inactive, available Changes the DO status of the drive object of the selected com‐
ponent.
1 = active, available
2 = not available
0 = inactive, HW avail‐ Changes the Component status of the selected component.
able
1 = active, HW availa‐
ble
2 = HW not available
Assigns the component numbers for the selected component
or for all lower-level components of the selected object.
Select whether only missing component numbers are augmen‐
ted or all component numbers are automatically regenerated.
Generates DOs or augments missing DO properties for the
selected component or for all lower-level DO-forming compo‐
nents of the selected object.
Select either the option Augment missing DO properties or
Generate new DOs and properties.
Removes all drive data of the DOs and all lower-level compo‐
nents of the selected object.
Removes all axis data of the axes and all lower-level compo‐
nents of the selected object.
<Ctrl+X> Cuts the selected object and copies it to the clipboard.
<Ctrl+C> Copies the selected object to the clipboard.
<Ctrl+V> Pastes the object from the clipboard at the selected position.
<Del> Deletes the selected object and all following objects connected
to the object.
F2 A name can be renamed via this function.
<Ctrl+F> The "Find and replace" dialog opens. Various search functions
are available.
25 % Only in the topology graph
... Allows the size of the display to either be increased or de‐
creased (zoom in / zoom out) in the topology graph. The size
300 %
can also be changed as required by holding down "Ctrl" and
turning the mouse wheel.
Only in the topology graph
Resets the topology graph to its standard representation.
Selects the selected module based on its device class and the
specified article number in the module catalog.
Create MyConfig - Topo
6.4 Topo - operation
463