Siemens SINUMERIK 840D sl Operating Manual page 462

Create MyConfig - Topo
6.4 Topo - operation
Figure 6-3
Additional functions
In addition to the standard functions such as "Cut", "Copy", "Paste", etc., the context menu of
the topology configurator provides further functions:
Table 6-9 Context menu for the topology configurator / topology graph
Function
Wire module
Replace module
Rewire
462
Assign DO variables
Description
New Wires a new or already used module.
Used
Replaces an already wired module with an equivalent module
from a different topology of the opened topology project.
In addition, only modules from the same device class that have
the same number of DRIVE-CLiQ ports are listed.
When replacing modules, all original wirings to further modules
are retained.
Downlink port As standard, a module in Topo is always wired with its first
DRIVE-CLiQ-Port (X100, X200, ...) to the lower-level module.
If the wiring is to be made to another port, any free DRIVE-
CLiQ-Port port can be selected.
Uplink port As standard, a module in Topo is always wired with its first
DRIVE-CLiQ-Port (X100, X200, ...) to the higher-level module.
If the wiring is to be made to another port, any free DRIVE-
CLiQ-Port port can be selected.
Rewiring is also possible with drag-and-drop.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE