Easy to operate Expert user interface
To a certain extent, you can adapt the Expert user interface to your requirements. When
opening Expert for the first time, the dockable window with the tabs Verification run, Cross
references and Source explorer is displayed in the bottom area of the Expert user interface.
Just like the project folder or the component editor, the size of this window can be changed.
The entire dockable window or even the individual tabs can be moved to a different position
of the user interface and docked or even moved to a position outside of the user interface, e.g.
to a second monitor, by pressing and holding the title bar or the tab.
Repositioning the dockable window
You can adapt the dockable window with the tabs Verification run, Cross references and
Source explorer, which can be selected and deselected, to your ambient conditions and the
work situation.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.2 Introduction
125