Create MyConfig - Expert
4.4 Project folder
Figure 4-45
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
dialog. All system variables used for "NCU/PPU result state" are listed in this dialog.
220
NCU/PPU result state - project engineer view
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "NCU/PPU result state"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE