Siemens SINUMERIK 840D sl Operating Manual page 428

Create MyConfig - Expert
4.13 Command line call
Parameter
Significance of the switch
Table 4-63 Expert parameters
Switch Arguments
/verify -
/config (<"Path configuration
file>")
The replacements of the switches, valid up to version V4.6, are listed in the following table.
Table 4-64 Replacement of the switches, valid up to version V4.6
Switches valid up to version V4.6
/pack <Project file path>
/deploy <" Deployment name">
/deploydir <"Deployment directo‐
ry">
/target< NCU | PCU | UAZ >
/uss <"uss file path">
/ust <"ust file path">
/tgz <"tgz file path">
/sdb <"sdb file path">
/utz <"utz file path">
Return values
Note
The return values from the Expert apply only if Expert is executed in /silent mode without user
interface.
The return values from Expert can be determined by querying the "%ERRORLEVEL%"
variables.
428
Optional Description
No* The switch causes the specified project to be onlyverified.
Yes The switch causes the configuration file (*.upcfg) to be processed
when calling Expert after opening the project.
In addition to the defined system variables, system variables that are
equivalent to the out-of-date switches can be included in this config‐
uration file.
Further information can be found in the following table, "Replacing
switches (valid up to version V4.6)".
Note
The configuration files (*.upcfg) are generated and exported with Ex‐
pert.
Further information can be found in the "Managing and using config‐
urations (Page 243)" section.
Replacement by system variables. Valid as of version V4.7.
Path of the project file after calling expert.exe
Example: expert.exe D:\Projects\MyProject.upz
Up.$Pack.DeployName="Deployment name"
Up.$Pack.DeployDir="Deployment directory"
Up.$Pack.DeployTarget=Up.$Pack.DeployTargets.LINUX
Up.$Dialog.StepSelection.CfgFile="Path of the uss file"
Up.$Dialog.DriveTopology.UstFile="Path of the ust file"
Up.$Dialog.NcuSetup.TgzFile="Path of the tgz file"
Up.$Dialog.SystemConfig.SdbFile="Path of the sdb file"
Up.$Dialog.DriveTopology.UtzFile="Path of the utz file"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE