Note
If the package is started from a service system USB FlashDrive, then generally booting is from
the CF card after this dialog.
Dialog scripts
In the "Dialog scripts" property, "Scripts" entry, click the
dialog. Here you can edit scripts that are to be executed at selectable times during package
execution.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 145)".
You can find an example of the dialog scripts for the CNC software in "Examples of scripts in
dialog pages (Page 149)".
4.4.2.23
CNC software (package execution)
This dialog serves the new installation or upgrade of the CNC software on the NCU/PPU.
Dialog view during package execution (for commissioning engineers / operators)
The "CNC software" dialog installs new CNC software or upgrades existing CNC software.
Further information can be found on package execution in the Package execution (Page 405)
section.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.4 Project folder
button to call the "Dialog scripts"
185