Ncu/Ppu Initial State (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.4 Project folder
Note
For "Setting disabled" property
The setting for selecting the data backup can be disabled for the operating procedure.
The licenses of the control are also backed up. When restoring a backup, a query appears as
to whether the licenses from the backup are to be restored, or the licenses on the control are
to be retained.
Archive
Back up archive
Dialog scripts
In the "Dialog scripts", "Scripts" entry, click the
Here you can edit scripts that are to be executed at selectable times during package execution.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 145)".
4.4.2.17

NCU/PPU initial state (package execution)

This dialog allows a data backup of the initial state of the NCU/PPU prior to the package
execution.
All current control data, including the CF card, or only the current active online data of the NC,
PLC and DRV subsystems can be saved as SINUMERIK archive.
Dialog view during package execution (for commissioning engineers / operators)
A data backup of the CF card including all current control data (NC, PLC, DRV) can be selected
on this dialog page. After package execution, the data backup is stored with the name '<CF
card ID>_origin.tgz' in the folder based on the CF card ID, which is located next to the
package.
Further information can be found on package execution in the Package execution (Page 405)
section.
174
Yes A complete archive can also be created for the diagnostics, with a set‐
ting for all data to be backed up.
The complete archive is stored in a folder named based on the CF card
No
ID with the name "Backup_<Date>.arc".
button to call the "Dialog scripts" dialog.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE