Installation; Overview; Installation Via Command Line; Structure Of The "Opfile.txt" Control File - Siemens SINUMERIK 840D sl Operating Manual

Installation

2.1

Overview

You have two options for installing engineering software "Create MyConfig" and the
"NcuShareService" application on your PC:
● Installation using the installation wizard
The CMC package is installed using the general setup.
The general setup involves the installation of Create MyConfig - and the installation of
Application License Managers (ALM). Installation is also possible without general setup.
You can find the "setup.exe" file at the following path:
"<CD-Setup-Pfad>\Setup\CMC\setup\x64".
If you wish to install a 32-bit version, then use path:
"<CD-Setup-Pfad>\Setup\CMC\setup\x86".
● Installation via command line
It can also be automatically installed without any user interaction.
An "OPFILE.txt" control file can be transferred as argument when starting the setup.
The setup process can be preconfigured in this control file. This means that it is no longer
necessary to manually work through the setup dialogs. The following sections describe the
option for installation via the command line.
2.2

Installation via command line

2.2.1

Structure of the "OPFILE.txt" control file

The file contains the section data [SETUPREQUESTS]as the first entry.
A parameter value is then allocated per line.
You can start comment lines with character "#".
Parameter description
Parameters and their possible values are listed in the following table:
Parameter
SetupMode
DestinationDrive
(optional)
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Description
Assign this parameter value "Batch" to prevent setup dia‐
logs from being displayed.
In this parameter, you can specify the target drive where
you wish to install the software.
The system drive is used if a value is not entered.
This parameter is ignored if CMC components are already
installed.
Example
SetupMode=Batch
DestinationDrive=C
2
15