Siemens SINUMERIK 840D sl Operating Manual page 495

Switch Arguments
/target (UST|(UTZ|USZ|EXE[27|44|45|47|
48]))
(UST|UVDX|(UTZ|USZ|EXE[27|
44| 45|47|48]))
/autocom‐ -
plete
/log <Log file>
/adduvdx <Uvdx path>
/exten‐ -
dcomp‐
names
Return values
Note
The return values for the Topo command line call apply only if Topo is executed in /silent
mode without user interface.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Optional Description
No ● Deployment type and CNC software version of the
NCU, on which the user-specified topology is applied.
Note
Deployment version
If no deployment version is specified for the "UTZ",
"USZ" and "EXE" deployment modes, the defined
deployment versions are used in the source for the
individual CUs. If no deployment version is defined, the
newest version is deployed.
Yes
● Automatically adds missing component numbers and
DO properties and sets up standard encoder
assignments if none have been specified.
Yes
● Specifies the path of a log file in either absolute or
relative terms.
● Alarms and faults are written to the log file (XML
format) when checking and deploying the package.
● Specification of this switch with its parameter is
optional.
Yes
● Specifies the path to an additional UVDX file when
importing an SDX file.
● If the SDX does not contain any DO and component
information in the form of a UVDX, this is added based
on the references contained in the SDX from the
specified UVDX.
● If the SDX file already contains DO and component
information, the action is aborted with an error
message.
● Is only effective when an SDX file has been selected
as topology path.
Yes
● When importing a topology from an SDX file, it can also
be selected whether the configured component names
should be augmented with the equipment identifiers
(EI) specified for modules in EPLAN.
● The resulting component name corresponds to the
following scheme: <equipment identifier>;
<component name>
● Is only effective when an SDX file has been selected
as topology path.
Create MyConfig - Topo
6.6 Command line call
495