Siemens SINUMERIK 840D sl Operating Manual page 176

Create MyConfig - Expert
4.4 Project folder
Figure 4-23
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
system variables" dialog. All system variables used for "Notes on GSP" are listed here.
Information on the system variables·can be found in the System variables for the Notes on
GSP dialog (Page 376) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
176
Notes on GSP - Project engineer view
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "Notes on GSP -
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE