Select Offline Archive (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.10

Select offline archive (configuration)

This dialog specifies from where the output data for the NC, PLC and DRV control areas for
the offline package execution without NCU is obtained.
You can configure the following property groups for the "Select offline archive" dialog page:
● Dialog
● Offline archives
● Input archive
● NC part archive (input)
● PLC part archive (input)
● DRV part archive (input)
● Output archive
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.4 Project folder
161