Alternatively, stored configurations can be managed via the following dialogs:
● "Dialogs" tab > "Package configuration"
The "List of project configurations" can also be displayed and the desired configuration
selected here.
– List
Figure 4-61
Call "Dialogs" tab > "Package configuration"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
To do this, select the "Package configuration" dialog page in the "Dialogs" tab. In the
"Package configuration" property > "List", click the
configurations" dialog. The available configurations with their properties are displayed
as a list.
Create MyConfig - Expert
4.4 Project folder
button to open the "List of package
249