Help For Problems With Ncushareservice; Installation; Create Myconfig Ncushare" Service - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - FAQs

7.2 Help for problems with NcuShareService

3. Sel disk 1 selects this data storage medium. You must use the right number on the
basis of your existing data storage medium.
4. clean erases the data storage medium chosen via the number. All data on it is erased!
5. create part primary creates a primary partition on the data storage medium.
6. format quick fs=fat32 label="CMC" runs fast formatting with fat32. The stick is
given the name "CMC".
7.2 Help for problems with NcuShareService
An exchange release is required for the package execution of Windows packages with NCU/
PPU share.
A setup is available for the installation of the service.
7.2.1

Installation

There are three ways to install the "Create MyConfig NcuShare" service.
1. Installation with the setup of Create MyConfig.
2. Manual installation through the execution of "NcuShareServiceSetup.msi".
After installing Create MyConfig, the setup file is available in the installation folder at "/
Shield".
3. Automatic installation during package execution.
When the service is installed, a folder can be configured for the installation types 1 and 2,
which is used as the exchange folder.
7.2.2

"Create MyConfig NcuShare" service

The service is installed during the installation on the Windows computer with the program name
"Create MyConfig NcuShareService" with the specified service version and entered with the
name "Create MyConfig NcuShare" in the list of services.
The service is in the service status "Finished" after installation.
The service is started with the execution of Windows packages with NCU/PPU share for the
duration of the package execution and is then closed again.
When the service is started, it automatically activates the exchange release, "UpNcuShare"
with folder "%Public%\UpNcuShare" for Windows 7 and "%ALLUSERSPROFILE%
\UpNcuShare" for WinXP, for NCU/PPU access.
530
NOTICE
Select Sel disk
A data storage medium that you did not want could be destroyed if you specify a wrong
number.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE