Siemens SINUMERIK 840D sl Operating Manual page 98

Create MyConfig - Diff
3.5 File comparison
Note
Lines or characters shown in gray have been excluded from a comparison by a filter.
⑤
Comparison configuration - filter
A filter is active in the comparison configuration. The comparison configuration is opened with
a double-click.
Note
You can exclude character strings that are not relevant for the comparison with inclusion or
exclusion filters.
These character strings are shown in gray in the comparison result.
⑥
Display of the current comparison configuration
The comparison configuration that is being used in the current comparison is displayed in this
field.
The comparison configuration is opened with a double-click.
⑧
Display of the lines to be compared above one another
The two lines below the comparison window represent the lines located side by side in the
comparison window, above one another; this simplifies comparing the lines character by
character.
In this display, you can see which type of characters are contained in the lines:
Color display
Red
Black
Green
Blue
A gray point
character at this position in the other line, which can also be a space.
98
represents a character that does not exist in this line. However, there is a
Meaning of the characters in the lines
Not equal to
Equal to
Only available on the left-hand side
Only available on the right-hand side
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE